Sunday, April 12, 2009

Satellite Phones


Satellite phone
From Wikipedia, the free encyclopedia
(Redirected from Satellite Phones)
Jump to: navigation, search
A satellite telephone, satellite phone, or satphone is a type of mobile phone that connects to orbiting satellites instead of terrestrial cell sites. Depending on the architecture of a particular system, coverage may include the entire Earth, or only specific regions.


Satellite phone (Inmarsat)The mobile equipment, also known as a terminal, varies widely. Early satellite phone handsets had a size and weight comparable to that of a late 1980s or early 1990s mobile phone, but usually with a large retractable antenna. More recent satellite phones are similar in size to a regular mobile phone while some prototype satellite phones have no distinguishable difference from an ordinary smartphone[1][2]. Satphones are popular on expeditions into remote areas where terrestrial cellular service is unavailable.

A fixed installation, such as used shipboard, may include large, rugged, rack-mounted electronics, and a steerable microwave antenna on the mast that automatically tracks the overhead satellites. Satellite phones have notoriously poor reception indoors, though it may be possible to get a consistent signal near a window or in the top floor of a building if the roof is sufficiently thin. The phones have connectors for external antennas that are often installed in vehicles and buildings. Some systems also allow for the use of repeaters, much like terrestrial mobile phone systems.

In some countries ruled by oppressive regimes, such as Burma, possession of a satellite phone is illegal[3][4] as their signals will usually bypass local telecoms systems, hindering censorship and wiretapping attempts. In Australia, residents of remote areas may apply for a government subsidy for a satellite phone.[5]

Contents [hide]
1 Satellite phone networks
1.1 Geosynchronous services
1.2 Low Earth orbit
1.2.1 Tracking
1.3 Proposed systems
2 One-way services
3 Cost of a satellite phone
4 Virtual country codes
5 Calling cost
6 Use in disaster response
7 See also
8 References
9 External links



[edit] Satellite phone networks

[edit] Geosynchronous services
Some satellite phones use satellites in geosynchronous orbit. These systems can maintain near-continuous global coverage with only three or four satellites, reducing the launch costs. However the satellites used for these systems are very heavy (approx. 5000kg) and therefore very expensive to build and launch. The satellites sit at an altitude of about 22,000 miles (35,000 km); a noticeable delay is present while making a phone call or using data services. The amount of bandwidth available on these systems is substantially higher than that of the Low Earth Orbit (LEO) systems; all three active systems provide portable satellite internet using laptop-sized terminals with speeds ranging from 60 kbits to 512 kbits.

Another disadvantage of geostationary satellite systems is that in many areas—even where a large amount of open sky is present—the line-of-sight between the phone and the satellite is broken by obstacles such as steep hills and forest. The user will need to find an area with line-of-sight before being able to use the phone. This is not the case with LEO services: even if the signal is blocked by an obstacle, one can wait a few minutes until another satellite passes overhead.

ACeS: This small regional operator provides voice and data services in East Asia using a single satellite.
Inmarsat: The oldest satellite phone operator, founded in 1979. It originally provided large fixed installations intended for use on ships, but has only recently started to enter the market of hand-held phones in a joint venture with ACeS. The company operates eleven satellites with another planned for launch in 2008. Coverage is available on most of the earth's surface, notably excepting polar regions.
Thuraya: A system based in the UAE which—until recently—operated a single satellite. Three satellites are currently in active service that provide coverage to the most of Eurasia, Africa and Australia. There is some degree of coverage overlap between adjacent satellites within the network.
MSAT / Mobile Satellite Ventures: An American satellite phone company which uses equipment similar to INMARSAT, but plans to launch a service using hand-held devices in the Americas similar to Thuraya's.

[edit] Low Earth orbit
LEO telephones utilizes LEO (low Earth orbit) satellite technology. The advantages include providing worldwide wireless coverage with no gaps. LEO satellites orbit the earth in high speed, low altitude orbits with an orbital time of 70–100 minutes, an altitude of 640 to 1120 kilometers (400 to 700 miles), and provide coverage cells of about (at a 100-minute orbital period) 2800km in radius (about 1740mi). Since the satellites are not geosynchronous, they must fly complete orbits. At least one satellite must have line-of-sight to every coverage area at all times to guarantee complete coverage. Depending on the positions of both the satellite and terrestrial user, a usable pass of an individual LEO satellite will typically last 4–15 minutes on average[6]; thus, a constellation of satellites is required to maintain coverage (as is done with Iridium, Global Star, GPS, and others).

Two such systems, both based in the United States started up in the late 1990s but soon went into bankruptcy after they failed to gain the number of subscribers required to fund the large satellite launch costs. They are now operated by new owners who bought the assets for a fraction of their original cost and are now both planning to launch replacement constellations supporting higher bandwidth. Data speeds for current networks are between 2200 bit/s and 9600 bit/s using a satellite handset.

Globalstar: A network covering most of the world's landmass using 44 active satellites; however many areas are left without coverage since a satellite must be in range of an earth station. Satellites fly in an inclined orbit of 52 degrees; as such, polar regions cannot be covered. The network went into limited commercial service at the end of 1999.
Iridium: A network operating 66 satellites in a polar orbit that claims coverage everywhere on the earth's surface. Commercial service started in November 1998 and fell into bankruptcy soon after. Notably radio cross-links are used between satellites in order to relay data to the nearest satellite with a connection to an earth station.

[edit] Tracking
LEO systems have the ability to track a mobile unit's location using doppler shift calculations from the satellite.[7] However, this method can be inaccurate by tens of kilometers. On some Iridium hardware the coordinates can be extracted using AT commands, while recent Globalstar handsets will display them on the screen.[8]


[edit] Proposed systems
ICO Satellite Management: A satellite phone company which has launched a single geosynchronous satellite which is not yet in active service.
Teledesic: An ill-fated company backed by Microsoft which planned to provide broadband internet using a network of 840 LEO satellites, it ended up launching only one test satellite.
Terrestar: Proposed satellite phone system for North America
Ellipso: Start up that entered a partnership with ICO

[edit] One-way services
Some satellite phone networks provide a one-way paging channel to alert users in poor coverage areas of an incoming call. When the alert is received on the satellite phone it must be taken to an area with better coverage before the call can be accepted.

Globalstar provides a one-way data uplink service, typically used for asset tracking.

Iridium operates a one-way pager service as well as the call alert feature.


[edit] Cost of a satellite phone

Satphones on displayWhile it is possible to obtain old handsets for the Thuraya, Iridium, and Globalstar networks for approximately $200, the newest handsets are still quite expensive. The Iridium 9505A, although released in 2001, still sells for well over $1,000 new. Since satellite phones are purpose-built for one particular network and cannot be switched to other networks, the price of handsets varies with the performance of the network. If a satellite phone provider encounters trouble with its network the handset prices will fall, then increase once new satellites are launched. Similarly, handset prices will increase when calling rates are reduced.

Among the most expensive satellite phones are BGAN terminals, often costing several thousand dollars. However these satphones provide broadband Internet as well as voice communications. Satellite phones are sometimes subsidised by the provider if one signs a post-paid contract but subsidies are usually only a few hundred dollars or less.

Since most satellite phones are built under license or the manufacturing of handsets is contracted out to OEM's, operators have a large influence over the selling price. Satellite networks operate under proprietary closed standards, making it difficult for manufacturers to independently make their own handsets.

Laptop




LAPTOPS

A laptop (also known as a notebook) is a personal computer designed for mobile use small enough to sit on one's lap.[1] A laptop includes most of the typical components of a desktop computer, including a display, a keyboard, a pointing device (a touchpad, also known as a trackpad, or a pointing stick), speakers, as well as a battery, into a single small and light unit. The rechargeable battery required is charged from an AC/DC adapter (aka, a wall wart) and typically stores enough energy to run the laptop for several hours.

Laptops are usually shaped like a large notebook with thicknesses between 0.7–1.5 inches (18–38 mm) and dimensions ranging from 10x8 inches (27x22cm, 13" display) to 15x11 inches (39x28cm, 17" display) and up. Modern laptops weigh 3 to 12 pounds (1.4 to 5.4 kg); older laptops were usually heavier. Most laptops are designed in the flip form factor to protect the screen and the keyboard when closed. Modern 'tablet' laptops have a complex joint between the keyboard housing and the display, permitting the display panel to twist and then lay flat on the keyboard housing. They usually have a touchscreen display and some include handwriting recognition or graphics drawing capability.

Laptops were originally considered to be "a small niche market"[2] and were thought suitable mostly for "specialized field applications" such as "the military, the Internal Revenue Service, accountants and sales representatives".[2][3] Battery-powered portable computers had just 2% worldwide market share in 1986[4]. But today, there are already more laptops than desktops in businesses, and laptops are becoming obligatory for student use and more popular for general use.[5] According to a forecast by Intel, more laptops than desktops will be sold in the general PC market as soon as 2009[6].

Contents [hide]
1 History
2 Classification
2.1 As replacement
2.2 Notebook
2.3 Subnotebook
2.4 Netbook
2.5 Rugged Laptop
3 Components
3.1 Docking stations
3.2 Standards
4 Advantages
5 Disadvantages
5.1 Performance
5.2 Upgradeability
5.3 Ergonomics and health
5.4 Durability
5.5 Security
6 Other portable computing devices
7 Major brands and manufacturers
8 Sales
9 See also
10 References



[edit] History
Main article: History of laptops

The Epson HX-20As the personal computer became feasible in the early 1970s, the idea of a portable personal computer followed. In particular, a "personal, portable information manipulator" was imagined by Alan Kay at Xerox PARC in 1968[7] and described in his 1972 paper as the "Dynabook"[8].

The I.B.M. SCAMP project (Special Computer APL Machine Portable), was demonstrated in 1973. This prototype was based on the PALM processor (Put All Logic In Microcode).

The I.B.M. 5100, the first commercially available portable computer, appeared in September 1975, and was based on the SCAMP prototype.

As 8-bit CPU machines became widely accepted, the number of portables increased rapidly. The Osborne 1 used the Zilog Z80, weighed 23.5 pounds (10.7 kg). It had no battery, only a tiny 5" CRT screen and dual 5¼" single-density floppy drives. In the same year the first laptop-sized portable computer, the Epson HX-20, was announced[9]. The Epson had a LCD screen, a rechargeable battery and a calculator-size printer in a 1.6 kg (4 pounds) chassis. Both Tandy/Radio Shack and HP also produced portable computers of varying designs during this period.

The first laptop using the clamshell design, used today by almost all laptops, appeared in 1982. The $8150 GRiD Compass 1100 was used at NASA and by the military among others. The Gavilan SC, released in 1983, was the first notebook marketed using the term "laptop".

From 1983 onwards:

Several new input techniques were developed and included in laptops: the touchpad (Gavilan SC, 1983), the pointing stick (IBM ThinkPad 700, 1992) and handwriting recognition (Linus Write-Top[10], 1987).
some CPUs were designed specifically for low power use (including laptops (Intel i386SL, 1990), and were supported by dynamic power management features (Intel SpeedStep and AMD PowerNow!) in some designs.
Displays reached VGA resolution by 1988 (Compaq SLT 286) and 256-color screens by 1993 (PowerBook 165c), progressing quickly to millions of colors and high resolutions.
High-capacity hard drives and optical storage (CD-ROM followed CD-R and CD-RW and eventually by DVD-ROM and the writable varieties) became available in laptops soon after their introduction to the desktops.
Early laptops often had proprietary and incompatible system architectures, operating systems, and bundled applications, making third party hardware and software difficult and sometimes impossible to develop.


[edit] Classification
The general terms "laptop" or "notebook" can be used to refer to a number of classes of small portable computers:[11][12]

By purpose and (approximately) by screen size:

Desktop replacement – emphasizes performance, is less portable, 15" and larger screen;
Standard laptop – balances portability and features, 13-15" screen;
Subnotebook – emphasizes portability, has fewer features, 13" or smaller screen.
By features:

Budget – a cheap, lower-performance standard-sized laptop;
Tablet PC – Has a touch-screen interface, may or may not have a keyboard;
Netbook – A cheaper, smaller version of a subnotebook suited to Internet surfing and basic office applications.
Rugged – Engineered to operate in tough conditions (strong vibrations, extreme temperatures, wet and dusty environments).



[edit] As replacement

Dell XPS M140 Laptop.Main article: Desktop replacement computer
A desktop replacement computer is a laptop that provides most of the capabilities of a desktop computer, with a similar level of performance. Desktop replacements are usually larger and heavier than standard laptops. They contain more powerful components and numerous ports, and have a 15.4" or larger display. Because of their bulk, they are not as portable as other laptops and their operation time on batteries is typically shorter.[12]

Some laptops in this class use a limited range of desktop components to provide better performance for the same price at the expense of battery life; in a few of those models, there is no battery at all, and the laptop can only be used when plugged in. These are sometimes called desknotes, a portmanteau of the words "desktop" and "notebook," though the term can also be applied to desktop replacement computers in general.[13]

In the early 2000s, desktops were more powerful, easier to upgrade, and much cheaper in comparison with laptops. But in the last few years, the advantages have drastically changed or shrunk since the performance of laptops has markedly increased.[14] In the second half of 2008, laptops have finally outsold desktops for the first time ever. In the U.S., the PC shipment declined 10 percent in the forth quarter of 2008. In Asia, the worst PC shipment growth went up 1.8 percent over the same quarter the previous year since PC statistics research started. [15]

The names "Media Center Laptops" and "Gaming Laptops" are also used to describe this class of notebooks.[11]


[edit] Notebook
Although the term Notebook is now often used interchangeably with the term Laptop, it was originally introduced to differentiate a smaller, thinner and lighter range of devices (comparable with a traditional paper notebook) which supplanted their larger counterparts[1].


[edit] Subnotebook

Sony VAIO C1 subnotebook.Main article: Subnotebook
A subnotebook, also called an ultraportable by some vendors, is a laptop designed and marketed with an emphasis on portability (small size, low weight and long battery life) that retains the performance of a standard notebook. Subnotebooks are usually smaller and lighter than standard laptops, weighing between 0.8 and 2 kg (2 to 5 pounds)[11]; the battery life can exceed 10 hours[16] when a large battery or an additional battery pack is installed.

To achieve the size and weight reductions, ultraportables use high resolution 13" and smaller screens (down to 6.4"), have relatively few ports, employ expensive components designed for minimal size and best power efficiency, and utilize advanced materials and construction methods. Some subnotebooks achieve a further portability improvement by omitting an optical/removable media drive; in this case they may be paired with a docking station that contains the drive and optionally more ports or an additional battery.

The term "subnotebook" is usually reserved to laptops that run general-purpose desktop operating systems such as Windows, Linux or Mac OS X, rather than specialized software such as Windows CE, Palm OS or Internet Tablet OS.


[edit] Netbook

An Asus Eee PC netbook.Main article: Netbook
Netbooks are laptops that are light-weight, economical, energy-efficient and especially suited for wireless communication and Internet access[17][18]. Hence the name netbook (as "the device excels in web-based computing performance")[19] rather than notebook which pertains to size[20].

Especially suited for web browsing and e-mailing, netbooks "rely heavily on the Internet for remote access to web-based applications"[19] and are targeted increasingly at cloud computing users who rely on servers and require a less powerful client computer.[21]. While the devices range in size from below 5 inches[22] to over 12[23], most are between 7 and 11 inches and weigh between 2 and 3 pounds[19].

Netbooks have a wide range of light-weight operating systems including Linux and Windows XP[19] rather than more resource-intensive operating systems like Windows Vista as they have less processing power than traditional laptops[24].


[edit] Rugged Laptop
Main article: Rugged computer

A Panasonic Toughbook.A rugged (or ruggedized) laptop is designed to reliably operate in harsh usage conditions such as strong vibrations, extreme temperatures and wet or dusty environments. Rugged laptops are usually designed from scratch, rather than adapted from regular consumer laptop models. Rugged notebooks are bulkier, heavier, and much more expensive than regular laptops[25], and thus are seldom seen in regular consumer use.

The design features found in rugged laptops include rubber sheeting under the keyboard keys, sealed port and connector covers, passive cooling, superbright displays easily readable in daylight, cases and frames made of magnesium alloys or have a magnesium alloy rollcage[26] that are much stronger than plastic found in commercial laptops and solid-state storage devices or hard disc drives that are shock mounted to withstand constant vibrations. Rugged laptops are commonly used by public safety services (police, fire and medical emergency), military, utilities, field service technicians, construction, mining and oil drilling personnel. Rugged laptops are usually sold to organizations, rather than individuals, and are rarely marketed via retail channels.


[edit] Components
Main article: Computer hardware

Miniaturization: a comparison of a desktop computer motherboard (ATX form factor) to a motherboard from a 13" laptop (2008 unibody Macbook)
Inner view of a Sony Vaio laptopThe basic components of laptops are similar in function to their desktop counterparts, but are miniaturized, adapted to mobile use, and designed for low power consumption. Because of the additional requirements, laptop components have worse performance than desktop parts of comparable price. Furthermore, the design bounds on power, size, and cooling of laptops limit the maximum performance of laptop parts compared to that of desktop components. [27]

The following list summarizes the differences and distinguishing features of laptop components in comparison to desktop personal computer parts:

Motherboard – laptop motherboards are highly make- and model-specific, and do not conform to a desktop form factor. Unlike a desktop board that usually has several slots for expansion cards (3 to 7 are common), a board for a small, highly integrated laptop may have no expansion slots at all, with all the functionality implemented on the motherboard itself; the only expansion possible in this case is via an external port such as USB. Other boards may have one or more standard or proprietary expansion slots. Several other functions (storage controllers, networking, sound card and external ports) are implemented on the motherboard.[28]
Central processing unit (CPU) – Laptop CPUs have advanced power-saving features and produce less heat than desktop processors, but are not as powerful.[29] There is a wide range of CPUs designed for laptops available from Intel (Pentium M, Celeron M, Intel Core and Core 2 Duo), AMD (Athlon, Turion 64, and Sempron), VIA Technologies, Transmeta and others. On the non-x86 architectures, Motorola and IBM produced the chips for the former PowerPC-based Apple laptops (iBook and PowerBook). Some laptops have removable CPUs, although support by the motherboard may be restricted to the specific models.[30] In other laptops the CPU is soldered on the motherboard and is non-replaceable.

A SODIMM memory module.Memory (RAM) – SO-DIMM memory modules that are usually found in laptops are about half the size of desktop DIMMs.[28] They may be accessible from the bottom of the laptop for ease of upgrading, or placed in locations not intended for user replacement such as between the keyboard and the motherboard.
Expansion cards – A PC Card (formerly PCMCIA) or ExpressCard bay for expansion cards is often present on laptops to allow adding and removing functionality, even when the laptop is powered on. Some subsystems (such as Wi-Fi or a cellular modem) can be implemented as replaceable internal expansion cards, usually accessible under an access cover on the bottom of the laptop. Two popular standards for such cards are MiniPCI and its successor, the PCI Express Mini. [31]
Power supply – laptops are powered by an internal rechargeable battery that is charged using an external power supply. The power supply can charge the battery and power the laptop simultaneously; when the battery is fully charged, the laptop continues to run on AC power. The charger adds about 400 grams (1 lb) to the overall "transport weight" of the notebook.
Battery – Current laptops utilize lithium ion batteries, with more recent models using the new lithium polymer technology. These two technologies have largely replaced the older nickel metal-hydride batteries. Typical battery life for standard laptops is two to five hours of light-duty use, but may drop to as little as one hour when doing power-intensive tasks. Batteries' performance gradually decreases with time, leading to an eventual replacement in one to three years, depending on the charging and discharging pattern. This large-capacity main battery should not be confused with the much smaller battery nearly all computers use to run the real-time clock and to store the BIOS configuration in the CMOS memory when the computer is off. Lithium-Ion batteries do not have a memory effect as older batteries may have. The memory effect happens when one does not use a battery to its fullest extent, then recharges the battery.
Video display controller – on standard laptops video controller is usually integrated into the chipset. This tends to limit the use of laptops for gaming and entertainment, two fields which have constantly escalating hardware demands[32]. Higher-end laptops and desktop replacements in particular often come with dedicated graphics processors on the motherboard or as an internal expansion card. These mobile graphics processors are comparable in performance to mainstream desktop graphic accelerator boards.[33]
Display – Most modern laptops feature 12 inch (30 cm) or larger color active matrix displays with resolutions of 1024×768 pixels and above. Many current models use screens with higher resolution than typical for desktop PCs (for example, the 1440×900 resolution of a 15" Macbook Pro[34] can be found on 19" widescreen desktop monitors).

A size comparison of 3.5" and 2.5" hard disk drivesRemovable media drives – a DVD/CD reader/writer drive is standard. CD drives are becoming rare, while Blu-Ray is not yet common on notebooks[35]. Many ultraportables and netbooks either move the removable media drive into the docking station or exclude it altogether.
Internal storage – Hard disks are physically smaller—2.5 inch (60 mm) or 1.8 inch (46 mm) —compared to desktop 3.5 inch (90 mm) drives. Some new laptops (usually ultraportables) employ more expensive, but faster, lighter and power-efficient Flash memory-based SSDs instead. Currently, 250 to 320 GB sizes are common for laptop hard disks (64 to 128 GB for SSDs).
Input – A pointing stick, touchpad or both are used to control the position of the cursor on the screen, and an integrated keyboard is used for typing. External keyboard and mouse may be connected using USB or PS/2 (if present).
Ports – several USB ports, an external monitor port (VGA or DVI), audio in/out, and an Ethernet network port are found on most laptops. Less common are legacy ports such as a PS/2 keyboard/mouse port, serial port or a parallel port. S-video or composite video ports are more common on consumer-oriented notebooks.

[edit] Docking stations
A docking station is a relatively bulky laptop accessory that contains multiple ports, expansion slots and bays for fixed or removable drives. A laptop connects and disconnects easily to a docking station, typically through a single large proprietary connector. A port replicator is a simplified docking station that only provides connections from the laptop to input/output ports. Both docking stations and port replicators are intended to be used at a permanent working place (a desk) to offer instant connection to multiple input/output devices and to extend a laptop's capabilities.

Docking stations became a common laptop accessory in the early 1990s. The most common use was in a corporate computing environment where the company had standardized on a common network card and this same card was placed into the docking station. These stations were very large and quite expensive. As the need for additional storage and expansion slots became less critical because of the high integration inside the laptop, the "port replicator" has gained popularity. The port replicator was a cheaper, often passive device that simply mated to the connectors on the back of the notebook and allowed the user to quickly connect his laptop so that his monitor, keyboard, printer and other devices were instantly attached. As higher speed ports such as USB and Firewire became common, the connection of a port replicator to a laptop was accomplished by a small cable connected to one of the USB or FireWire ports on the notebook. Wireless Port Replicators are available as well.

A recent variant of the port replicator is the combined power/display/USB hub cable found in the new Apple Cinema Display[36].


[edit] Standards
Some laptop components (optical drives, hard drives, memory and internal expansion cards) are relatively standardized, and it is possible to upgrade or replace them in many laptops as long as the new part is of the same type.[31] Subtle incompatibilities and variations in dimensions, however, are not uncommon.[37] Depending on the manufacturer and model, a laptop may range from having several standard, easily customizable and upgradeable parts to a proprietary design that can't be reconfigured at all.

In general, components other than the four categories listed above are not intended to be replaceable, and thus rarely follow a standard. In particular, motherboards, locations of ports, design and placement of internal components are usually make- and model-specific. Those parts are neither interchangeable with parts from other manufacturers nor upgradeable. If broken or damaged, they must be substituted with an exact replacement part. The users uneducated in the relevant fields are those the most affected by incompatibilities, especially if they attempt to connect their laptops with incompatible hardware or power adapters.

Intel, Asus, Compal, Quanta and other laptop manufacturers have created the Common Building Block standard for laptop parts to address some of the inefficiencies caused by the lack of standards.